All our products are designed in our workshop and originally measured in centimeters for production. Use a dual cm/inches measurement tape or refer to each product chart and follow this step by step guide. Fastened and lay the jacket or denim/pants flat, take all the measurements from the outside. You can compare these measurements to a similar jacket or denim you already own or fit in.
Measure straight across the back between shoulder's top seams.
Zip up and lay the jacket flat, measure straight between underarm seams lowest points.
Measure straight the width between bottom jacket lowest points.
Measure from the top shoulder seam to the cuff’s end.
Measure from the highest collar point to the bottom of the jacket.
DENIM & PANTS
Buttoned up and lay the denim flat. Pull the waistband while measuring from top edge to edge then double this number to get the waist measurement.
Measure from the crotch seam straight to the waistband edge.
From 2.5cm/1" below the crotch, measure straight across the fabric's edges.
Measure the rise from the crotch seam straight up to the front waistband edge above the button.
Measure the knee width 35.5cm/14" down from the crotch seam.
Measure the width across the bottom of the leg opening, also called the hem.